Light Barrier Detector
作者:dolphin
时间:2009-08-25
This simple circuit using a single transistor turns ON the relay when light falls on the LDR.
The potentiometer is adjusted for the required sensitivity.
The power supply is 6V.
Be careful about the impedance of the relay. Its impedance should not be less that 60ohm.
Its working can be explained as follows:
With the light falling on the LDR,its resistance is low and the transistor is saturated and turns the relay ON.
When light is obstructed, the LDRs resistance becomes very high. The potentiometer shorts the transistors
base to ground and it is cut off. Hence the relay is OFF.
加入微信
获取电子行业最新资讯
搜索微信公众号:EEPW
或用微信扫描左侧二维码