只使用一个ADC电容式触摸（CVD）
上传用户：aagreen0514
上传日期：2012-04-22
文件类型：PDF
文件大小：152.24K
资料积分：0分 积分不够怎么办？
This application note describes a new hardware
sensing method called Capacitive Voltage Divider
(CVD) which uses no external components. It requires
only the ADC to perform capacitive touch sensing. The
principle is simple, and can be applied to nearly any
Microchip PIC
®
device with an ADC. AN1298
Capacitive Touch Using Only an ADC (“CVD”)
Sensing Steps
Authors: Thomas Perme
Dieter Peter To perform the sensing, do the following:
Microchip Technology Inc. 1. Drive secondary channel to VDD as digital
output.
INTRODUCTION 2. Point ADC to the secondary VDD pin (charges
CHOLD to VDD).
This application note describes a new hardware
sensing method called Capacitive Voltage Divider
(CVD) which uses no external components. It requires
only the ADC to perform capacitive touch sensing. The
principle is simple, and can be applied to nearly any
Microchip PIC
®
device with an ADC. AN1298
Capacitive Touch Using Only an ADC (“CVD”)
Sensing Steps
Authors: Thomas Perme
Dieter Peter To perform the sensing, do the following:
Microchip Technology Inc. 1. Drive secondary channel to VDD as digital
output.
INTRODUCTION 2. Point ADC to the secondary VDD pin (charges
CHOLD to VDD).
This application note describes a new hardware
关键词： 电容式触摸 CVD ADC
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码